NEMA Baldor Motors

1. General Purpose Motors – TEFC

General Purpose motors are available in a wide variety of construction enclosures from industrial steel band open designs to harsh applications requiring totally enclosed cast iron designs in both single and three phase. Designed for "general purpose" use means that these motors can be used in many applications. The Super E Motors (EM & CEM) provide NEMA Premium efficiency and are designed as standard to be inverter ready with wide variable torque speed ranges.

2. General Purpose Motors – ODP

• 1/4 - 1500 HP (0.18 - 1100 kW)
• 200, 230/460, 460, 575 VAC
• C-face – with and without base, D-flange
• 50 Hz and 50/60 Hz available

3. Pump Motors

From industrial wastewater to fire suppression systems or commercial pools, Baldor•Reliance pump motors provide value by increasing reliability and reducing maintenance costs. Utilizing energy efficient designs, our pump motors meet NEMA Premium® efficiency and Inverter ready with wide variable torque speed ranges. Motor construction can be tailored for specific applications and industries such as food processing, washdown applications or explosion proof enclosures for pumps in hazardous areas.

• TEFC 1 - 50 HP (0.75 - 37 kW)
• ODP 1 - 75 HP (0.75 - 56 kW)
• Jet Pump 56J through 3 HP (2.2 kW)
• Single and Three Phase
• 115/230, 200, 230/460, 460, 575, 2300/4000 VAC
• 50 Hz and 50/60 Hz available
• JM, JP and West Coast mounting, SAE Hydraulic Pump
• Vertical Solid Shaft, Low, Medium and High Thrust, API 610 to 900 HP (670 kW)
• Pump motors with shaft grounding for use with adjustable speed drives
• Submersible 1 - 450 Hp (.75 - 335 kW) and Immersible 5 - 250 Hp (3.7 - 186 kW) Designs

4. HVAC Motors

We offer a complete line of motors designed for use in the harshest HVAC appliations. We have motors available with integrated internal shaft grounding systems. Motors for Chiller/Cooling Towers, Condenser and fan applications, and more.

• TENV & TEFC 1 - 50 HP (0.75 - 37 kW)
• ODP 1 - 100 HP (0.75 - 75 kW)
• Single and Three Phase
• 115/230, 200, 230/460, 460, 575 VAC
• 50 Hz and 50/60 Hz available
• Resilient Mount Motors
• TEAO Cooling Tower motors 3 - 100 HP (2.2 - 75 kW)
• Motors with shaft grounding for use with adjustable speed drives

5. Unit Handling & Conveyor Motors

Baldor-Reliance has four unique solutions for unit handling applications: Motor only, High Cycle Brake motors, D-Series Brake motors, and Short Series Brake motors.

• TEFC 1/2 - 7 1/2 HP (0.37 - 5.6 kW)
• TEFC Brake Motors 1/2 - 10 HP (0.37 - 7.5 kW)
• Short Series and High Cycle Brake motors
• Single and Three Phase
• 115/230, 200, 230/460, 460, 575 VAC
• 50 Hz and 50/60 Hz available
• Motors with shaft grounding for use with adjustable speed drives

6. Explosion Proof Motors

• TENV & TEFC 1/4 - 800 HP (0.18 - 600 kW)
• Division 1, Class I & Class II certifications
• 1.0, 1.15 S.F.
• Single and Three Phase
• 115/230, 200, 230/460, 460, 575 VAC
• C-face – with and without base, D-flange available
• 50/60 Hz, 50 Hz available
• ATEX and IEC Ex certifications available

7. Direct Drive Cooling Tower Motors

The RPM AC™ synchronous PM motor uses laminated finned frame construction to provide a highly efficient power dense package with flange mounting dimensions that can replace the right angle gearbox and jack shaft installation in many conventional cooling towers. This same technology is offered in conventional, yet power dense, foot mounted designs that can replace the belt and sheave application where more vertical mounting space is available. Derived from one of the toughest motor platforms used in the most demanding industrial applications, the RPM AC motor is the right solution for operation inside the tower’s hot and humid environment.

• TEAO 5 1/2 – 220 kW (7.5 – 350 hp)
• Custom Voltages available from 200V through 690V
• High Efficiency Interior Permanent Magnet Design
• Unique Direct Drive Technology eliminates CT Gearbox
• 90 to 650 RPM
• Requires ABB ACS880+N5350 Cooling Tower Drive

8. Large AC Induction Motors

Large ac induction motors extend up to 30,000 HP in a variety of enclosures including TEFC, TEAAC, TEWAC, ODP, WPI, WPII, etc., with both inverter duty and sine wave operation designs available. Pole counts range from 2 pole to 20+, for both 50 and 60 Hz operation in NEMA and IEC configurations. Custom engineered designs are suitable for use in every environment and/ or application from general purpose to harsh, severe-duty locations with API 541, API 547, & IEEE-841 compliance where needed. Motors are also available for hazardous locations including explosion proof Division 1, Division 2, & ATEX.

• TEFC, TEAAC & TEWAC, ODP, WPI, WPII to 30,000 HP (23 MW)
• Low (to 690 VAC), Medium Voltage (to 6900 VAC), High voltage (to 13.2 kV)
• Vertical and horizontal mounting // 50 and 60 Hz
• NEMA, IEC, CSA, BS, ANSI, API 541, API 547
• ATEX, IEC Ex, UL, CSA, TR CU, hazardous area certificates available
• Major marine certifications available, e.g. ABS, DNV, BV, and GL

9. Gear motors & Speed Reducers

Planetary gear heads designed for servo applications requiring precision, durability, and long trouble free operation. These are high efficiency gear heads that maximize the power transmission capability. They are designed with low backlash to reduce shock loads in dynamic reversing applications. They mount directly to the BSM servo motor family to provide torque multiplication, speed reduction, and inertia matching.

• AC and DC Gearmotors
• Right Angle Gearmotors
• Parallel Shaft Gearmotors
• Inline Helical Speed Reducers
• Right Angle Speed Reducers
• Washdown and Stainless Steel Right Angle Speed Reducers
• AC and DC Pre-Selected and Assembled Motor and Gearbox Combinations

10. DC Motors

DC motors continue to be the best solution for many industrial applications, particularly those requiring constant torque across the motor’s entire speed range.

ABB -Baldor offers a wide range of DC motors including Permanent Magnet, Shunt Wound, and RPM III Wound. Baldor also offers DC Explosion Proof and Washdown motors.

• Fractional HP Wound Field 1/4 - 3 HP (0.18 - 2.2 kW)
• Integral HP Wound Field motors 1/4 - 500 HP (0.18 - 370 kW)
• Integral HP Laminated Frame Wound Field motors 3 - 3000 HP (2.2 - 2240 kW)
• Explosion Proof motors 1/2 - 40 HP (0.37 - 30 kW)
• 115 or 230 VDC Power Motors 1/3 - 1.5 HP (0.25 - 1.1 kW)
• 90 or 180 VDC for 1PH Control, 240, 500 or 700 VDC for 3PH Control
• TENV, TEFC, TEDC, DPFG, DPBV Enclosures
• DC tachometers and feedback devices
• IEC laminated frame wound field motors 27 - 1300 kW

11. Servo Motors

ABB & Baldor Electric Company offer a variety of AC and DC servo motors for industrial, automated applications such as packaging, labelling, wrapping and cutting.

• IEC & NEMA mounting available
• Acceleration torques from 16 lb-in (1.8 Nm) to 3186 lb-in (360 Nm)
• Inertia range .00006 - .57 lb-in-s2 (.067 - 644 Kg-cm2)
• Standard windings for 160, 300, 650 bus volts - customs available
• Feedback and Brake options available.
• High output torque at low speed – continuous 4 lb-in (0.4 Nm) to 1062 lb-in (120 Nm)